This book describes how to install an openCRX Server with the BitRock installer on Windows or Linux platforms. Please note that this is a guide to set up a runtime environment suitable for evaluation and testing purposes. It is not recommended to use this configuration for a production site.

openCRX is the leading enterprise-class open source CRM suite. openCRX is based on openMDX, an open source MDA framework based on the OMG's model driven architecture (MDA) standards. This guarantees total openness, standards compliance, a state-of-the-art component-based architecture, and virtually unlimited scalability.

1.1 Who this book is for

The intended audience are openCRX administrators and advanced users interested in evaluating openCRX.

1.2 What do you need to understand this book

This book describes how to install openCRX with the BitRock installer, which takes care of all the tricky configuration issues for you. The prerequisites are minimal (JDK) and once they are met you should have openCRX up and running in less than 5 minutes.

1.3 Tips, Warnings, etc.

We make use the following pictograms:

Information provided as a “Tip” might be helpful for various reasons: time savings, risk reduction, etc. - it goes without saying that we advise to follow our guides meticulously

meticulous \muh-TIK-yuh-luhs\, adjective:
Extremely or excessively careful about details.

You should carefully read information marked with “Important”. Ignoring such information is typically not a good idea.

Warnings should not be ignored (risk of data loss, etc.)

2 Prerequisites

2.1 JDK 5.0

Install the Sun Java JDK 5.0 available from
http://java.sun.com/javase/downloads/index_jdk5.jsp

You really need Java 5, i.e. neither Java 4 nor Java 6 will work.

	It is not sufficient to have a Java Runtime Environment (JRE) only. The full-blown JDK is required to run openCRX.
	It is a good idea to avoid paths containing blanks like the default installation directory ...\Program Files\... on Windows.
	Don't forget to set the environment variable JAVA_HOME

2.2 Ant 1.7.0

Install Ant 1.7.0 for your platform. Downloads are available from http://ant.apache.org/

It is a good idea to avoid paths containing blanks like the default installation directory ...\Program Files\... on Windows

Ant v1.7.1 should work as well. However, if the installation of the openCRX SDK fails with Ant v1.7.1, please try Ant v1.7.0 (some combinations of JDK versions and Ant don't “like” each other...

2.3 openMDX Tomcat EJB Installer

Download the openMDX Tomcat EJB Installer appropriate for your platform from Sourceforge: http://www.openmdx.org/downloads.htm

Installer for Windows:
openmdxTomcatEjb-2.4.0-windows-installer.exe

Installer for Linux:
openmdxTomcatEjb-2.4.0-linux-installer.bin

The openMDX Tomcat EJB Installer will install Apache Tomcat v6.0.18 including Apache's OpenEJB on your system.

2.4 openCRX Server Installer

Download the openCRX Server Installer appropriate for your platform from Sourceforge: http://www.opencrx.org/downloads.htm

Installer for Windows:
opencrxServer-2.4.0-windows-installer.exe

Installer for Linux:
opencrxServer-2.4.0-linux-installer.bin

The openCRX Server Installer will install the openCRX EARs, an openCRX database (HSQLDB), and various configuration files on your system.

2.5 Hardware

We recommend a decent CPU and at least 1GB RAM. More detailed information about the requirements of openCRX are available from http://www.opencrx.org/faq.htm#hardware

3 Installing openCRX Server on Windows

3.1 Apache Tomcat / OpenEJB

Launch the Installer openmdxTomcatEjb-2.4.0-windows-installer.exe
Click [Next] on the following screen:
Accept the BSD License Agreement and click [Next] again:
Choose an installation directory (it will be created automatically if it does not exist yet). Then click [Next] to continue:

It is a good idea to avoid paths containing blanks like the default installation directory ...\Program Files\... on Windows
Please note the information on the following screen. It is assumed that you have installed JDK 1.5 (also called JDK 5.0) appropriate for your platform (see Prerequisites). Click [Next] to continue:
Select the home directory of your JDK 1.5 installation - for example D:\Java\jdk1.5.0 - and then click [Next] to continue:
Select the home directory of your Ant installation – for example
D:\apache-ant-1.7.0 - and then click [Next] to continue:
Enter the Tomcat ports (defaults are shown below). Please note that Tomcat does not start properly unless it has exclusive use of these ports. Click [Next] to continue:
Finally, click [Next] to start the installation:
Once the installation is complete, verify the result of the post installation script and click [Ok]:
Click [Finish] on the last screen to leave the installer:
On your desktop, you should see the following new shortcuts created by the installer:

3.2 openCRX

Launch the Installer opencrxServer-2.4.0-windows-installer.exe
Click [Next] on the following screen:
Accept the BSD License Agreement and click [Next] again:
On the following screen, navigate to the Tomcat installation directory – for example P:\openmdxTomcatEjb-2.4.0 – and then click [Next] to continue:
Please note the information on the following screen and then click [Next] to continue:
Select the home directory of your JDK 1.5 installation - for example D:\Java\jdk1.5.0 - and then click [Next] to continue:
Select the home directory of your Ant installation – for example
D:\apache-ant-1.7.0 - and then click [Next] to continue:
Enter the port number of the HSQLDB service. You can choose any port available on your system. The default is 9001. Click [Next] to continue:
Finally, click [Next] to start the installation:
Verify that the post installation completed with errors and then click [OK]:
Once the installation is complete, click [Finish] on the last screen:
Finally, please carefully read the README, in particular information about valid URLs, preconfigured users and passwords:
On your desktop, you should now see the following shortcuts:

4 Installing openCRX Server on Linux

There is no need to install openCRX as root. We created a user crx and the whole installation procedure is done as user crx.

4.1 Apache Tomcat / LWC

Launch the Installer openmdxTomcatEjb-2.4.0-linux-installer.bin
Click [Forward] on the following screen:
Accept the BSD License Agreement and click [Forward] again:
Choose an installation directory (it will be created automatically if it does not exist yet). Then click [Forward] to continue:
Please note the information on the following screen. It is assumed that you have installed JDK 1.5 (also called JDK 5.0) and Ant v1.7.0 appropriate for your platform (see Prerequisites). Click [Forward] to continue:
Select the home directory of your JDK 1.5 installation - for example
/opt/jdk1.5.0_17 - and then click [Forward] to continue:
Select the home directory of your Ant installation - for example
/opt/apache-ant-1.7.0 - and then click [Forward] to continue:
Enter the Tomcat ports (defaults are shown below). Please note that Tomcat does not start properly unless it has exclusive use of these ports. Click [Next] to continue:
Finally, click [Forward] to start the installation:
Once the installation is complete, verify the result of the post installation script and click [Ok]:
Click [Finish] on the last screen to leave the installer:
On your desktop, you should see the following new shortcuts created by the installer:

4.2 openCRX

Launch the Installer opencrxServer-2.4.0-linux-installer.bin
Click [Forward] on the following screen:
Accept the BSD License Agreement and click [Forward] again:
On the following screen, navigate to the Tomcat installation directory – for example /home/crx/openmdxTomcatEjb-2.4.0 – and then click [Forward] to continue:
Please note the information on the following screen and then click [Forward] to continue:
Select the home directory of your JDK 1.5 installation - for example
/opt/jdk1.5.0_17 - and then click [Forward] to continue:
Select the home directory of your Ant installation – for example /opt/apache-ant-1.7.0 – and then click [Forward] to continue:
Enter the port number of the HSQLDB service. You can choose any port available on your system. The default is 9001. Click [Forward] to continue:
Next, click [Forward] to start the installation:
Verify that the post installation completed with errors and then click [OK]:
Once the installation is complete, click [Finish] on the last screen:
Finally, please carefully read the README, in particular information about valid URLs, preconfigured users and passwords:
On your desktop, you should now see the following shortcuts:

5 Running openCRX Server

The installation process created 8 shortcuts on your desktop:

	Start Tomcat+EJB
	Stop Tomcat+EJB
	Login Tomcat+EJB (launch browser and connect to Tomcat)
	Start openCRX Server (start HSQLDB, start Tomcat and deploy openCRX)
	Stop openCRX Server (stop Tomcat, stop HSQLDB)
	Start HSQLDB
	Stop HSQLDB
	Launch Management Console of HSQLDB

5.1 Start openCRX Server

Double-click the shortcut Start openCRX Server.

5.2 Connect and Login

Double-click the shortcut Login Tomcat+EJB. This will launch your default browser and take you to the Tomcat home page. In the lower left corner you will see a box labeled openCRX CRM:

Click on openCRX Core to load the openCRX login page. Enter a valid username (e.g. guest) and the corresponding password (e.g. opencrx) and then click [Login]. Initialization takes place during the first login after (re)starting Tomcat, so please be patient. Subsequent logins will be very fast.

5.3 Stop openCRX Server

Double-click the shortcut Stop openCRX Server.

6 Next Steps

Now that you have successfully installed openCRX you might want to have a look at some of the additional documentation published at http://www.opencrx.org/documents.htm.